Reference and Education

VVS Diamond Clarity: How It graded

The most important thing to know about diamonds is that they are not alike. They can be cut in many different ways, and each one has a unique set of characteristics. The clarity grade is an indication of how clear or opaque the diamond is. A higher number indicates a more transparent stone. There are four main categories of clarity grades: VS1 (Very Slightly Included), VS2, SI1 (Slightly Included), and SI2 (Included). This article will explain what is the difference between VS diamond and VVS diamond clarity grading system, and give you some tips on how to determine if your diamond is VVS.

VVS Diamond versus VS Diamond: Why you need to know the difference!

When it comes to buying a diamond, there are two types of people: those who want their diamond to look as good as possible, and those who don’t care much about appearance. If you fall into the latter category, then you might be interested in learning more about the differences between VVS and VS clarity grades. In this article, we will discuss why you should pay attention to the difference between these two clarity grades.

What does “clarity” mean?

Clarity means the presence of any imperfections within a diamond. We call these imperfections inclusions. Inclusions are tiny cracks or flaws inside the diamond that affect its overall light transmission and brilliance. Inclusions can appear anywhere from microscopic to visible to the naked eye.

There are three main types of inclusions: natural, artificial, and lab-created. Natural inclusions are created by nature when the diamond was formed. Artificial inclusions are manmade; they are made during the cutting process. Lab-created diamond inclusions are created artificially in a laboratory setting.

Natural inclusions can occur naturally at various depths throughout the entire depth of the diamond. As such, they do not have any effect on the value of the diamond. However, they can cause problems with the beauty of the diamond. For example, natural inclusions may make the diamond cloudy, which makes it less brilliant.

Artificial inclusions can also occur naturally or unnaturally. The use of improper tools causes unnatural inclusions.

Diamond clarity: blemishes and inclusions

Artificial inclusions are manmade. They can occur for several reasons, including using poor quality equipment, incorrect settings, and even human error. Artificial inclusions can also result from the manufacturing process itself. Some of these inclusions are unavoidable and cannot be removed. Others can be removed through careful polishing.

There is a clarity scale used to rate the severity of inclusions. The scale ranges from IF (Internally Flawless) to I3 (Poorly Cut). Most diamonds fall somewhere in between IF and I3.

IF diamonds are flawless. They contain no inclusions whatsoever. They are considered perfect because they are free of any defects.

How does GIA determine clarity grades for diamonds?

Gemological Institute of America (GIA) uses a microscope to examine every facet of the diamond. Then, they measure the size, number, and location of the inclusions in order to assign a clarity grade. This grading system has been around since the 1930s and is still widely accepted today.

The following table shows the different clarity grades and what each one represents.

What is a VVS diamond?

A VVS diamond is a diamond that contains no visible inclusions to the naked eyes. A VVS diamond is considered flawless because it is completely flawless. There are no inclusions at all. There are two categories of VVS diamond: VVS1 and VVS2.

Both of these categories represent a diamond that is flawless. But there is a difference between them. VVS1 diamonds are slightly larger than VVS2 diamonds.

What is a VS diamond?

A VS diamond is a diamond that has very few visible inclusions. Visible inclusions are anything you would see if you were looking at the diamond under a 10x magnifying lens. You could see inclusion as small as 0.25 mm. Inclusions are classified into two categories: VS1, and VS2.

VS1 diamonds are the smallest category. These diamonds have some visible inclusions but none that are large enough to affect the appearance of the diamond.

So, which should you choose – a VVS diamond or a VS diamond?

It depends on your preference. If you want a diamond that looks beautiful without any flaws, then go for a VVS diamond. Otherwise, if you prefer a diamond with fewer flaws, then go for the VS diamond. Both types of diamonds will look great when worn.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button